6 Facts About Everyone Thinks Are True
Various Advantages of Using TIG Welding
There are some people who are just new to welding and are desiring to get on TIG welding. If this is the case, consider reading more in the article below.
Some of the popular welding machines today would be TIG. This is known in other terms as Gas Tungsten Arc Welding or GTAW. Though the case of controlling TIG machines is something that’s hard at the start, it will, however, pay off after mastering it. Below are some of the advantages of using TIG welding.
There are different advantages that come with every welding machine. After seeing the welder do the work, choosing a TIG welding is the best decision that you could make. With this article, you will have enough knowledge in making the decision to buy a TIG welding.
There’s no Flux
A TIG welding actually does not need any flux because the inert gas will be there in order to shield on the molten metals. This removes the hassle of slag inclusions.
Best Quality Welds
Normal welds actually don’t work and will need high-quality weld for it to function very well. The sturdy the weld, the better it will be. This is why TIG weld is well-known in delivering the best quality sturdy weld. Also, not all welders have such an offer.
Weld is Clean
For the metal arc welding, welds have to be attractive. But, welds need to look nice or it would harm the entire appearance of such a thing. For the clean, attractive and shiny welds, there’s actually nothing better than the TIG welds. They also are very popular for its shiny and clean welds. All welds actually need finishing, but a TIG weld actually looks appealing from the very start and there’s no finishing necessary.
Comes with a Thin Section Weld
When you are ever in search of a welder that can leave amazing welds for the thin gauge metals, TIG would be the best choice to make. Aside from the fact that it is clean and has a shiny weld, it’s another reason why TIG welds are being used widely.
No Spatter
A spatter is a small filler metal droplet that occurs because of an arc. This is actually a big problem because sometimes it will drop on the base metal itself and will need grinding later for it to clean the spatter. But, most of the welding will produce spatters, but the TIG welding is actually very less.
The thing about TIG welding is that it won’t create any spatter. However, when the base metal is not properly cleaned, it may create a little spatter.
Welding Positions
There are actually three positions of welding. It would be the overhead, inclined and also the down-hand. In such positions, overhead welding would be the toughest because the filler metal will need deposition against gravity. Also, there are higher chances of the filler metal falling down.
When you do an overhead welding, it is actually impossible with some of the welding machines. However, TIG machines actually allow you to do overhead welding. This, however, is possible with the use of a nice TIG machine and a welder who is very skilled.
Versatile
Welders usually need a filler material for it to join two metal pieces together. However, a TIG welder could work either with or without a filler metal. Also, TIG welding will allow you to work with various metals.